ROBEL ROPOWER 70.02, Operating Manual

Page: 7 / 152

1. General
7
1.3 Intended Audience for this Operating Manual
This operating manual contains important information for the
intended use of the product described therein.
The manual has been written exclusively for technically quali-
fied personnel.
Qualified personnel in this context are:
• Personnel who have demonstrated their suitability for
working with this product, whether through qualifications
or experience.
• Persons who are familiar with the safety concepts of ma-
chines and equipment;
• Maintenance and service personnel who have been special-
ly trained in the repair of machines and equipment.
Only people who are capable of reading this manual may work
on this machine. They must have read and understood this
manual, and have confirmed this with their signature.
The installation, maintenance and operation of the product
may only take place having regard to, and in strict conform-
ance with, the valid operating and safety standards and official
regulations, particularly those concerning safety, industrial
safety, environmental protection and the prescribed operating,
maintenance and safety instructions of manufacturers and
suppliers or other regulations.
1.4 Liability Exclusions
The manufacturer accepts no liability whatsoever for such
losses that may arise if the product is used for purposes other
than its intended use. If the product is operated without safety
devices, that is also deemed to be other than intended use.
Every use other than the specified use of this product is con-
sidered to be other than intended use and endangers the life
and limb of the operating and maintenance personnel as well
as the property of the operator. The manufacturer of the prod-
uct accepts no liability for injury to persons or damage to prop-
erty, whether of the operator or third parties, if:
–
• The product is not used as intended,
• The operating and maintenance personnel have not read
and understood this operating manual and have used the
product for a purpose other than that intended,
• The operating and maintenance personnel are not suffi-
ciently qualified,
• The product is operated under conditions beyond the stat-
ed limits,
• The product is not maintained according to the specified
intervals as required,
• The product is not maintained using original spare parts,
• Components and attachments of the product are modified
without proper authority.
These grounds for exemption of liability for personal injury or
material damage shall not affect other grounds for exclusion.