ROBEL ROPOWER 70.02, Operating Manual

Page: 10 / 152

2. Safety
10
The warnings are structured as follows:
SIGNAL WORD
Type and source of danger!
Possible consequences when ignoring the
danger.
►
Measure to avoid the danger.
2.4 Design changes, original parts
The manufacturer accepts no liability for unauthorised modifi-
cations to components and attachments to the product.
Original parts and accessories are specially designed for this
product. In certain circumstances the use of non-approved re-
placement parts can impair or have a detrimental impact on
the design characteristics of the product.
The manufacturer is not liable for any damage which is proven
to be attributed to the use of such parts or inferior operating
fluids.
2.5 Protective devices
Tampering with the safety devices can endanger the life of the
user and others!
► When operating the equipment, the user is also obliged to
actually attach the safety devices or to leave them in their
factory-installed positions.
► After completing his work, the person instructed to carry
out the maintenance must re-attach the safety devices.
2.6 Safety regulations
The handling requirements necessary for the protection of life,
health, property and the environment must be ensured as a
matter of priority.
► Before using the device, make sure you can prove that all
personnel affected have been made aware of the following
relevant regulations and provisions:
• statutory safety regulations
• stipulations of the respective building code and works rules
• stipulations of the respective professional and trade asso-
ciations
• industrial and environmental safety regulations
• approvals regulations
• internal company regulations
• All other applicable regulations, in addition to and in con-
cert with the manufacturer’s safety and operating regula-
tions
If necessary, the office in charge of operation must lay down
additional regulations and measures geared to the special
tasks of the product to ensure that all safety requirements are
met.
Structure of the warnings