ROBEL 62.05L, Operating Manual

Page: 71 / 151

71
9. Maintenance
Fig. 65: Consider the dimension 74 mm
1 Screws for engine shaft
2 Flange of tamping pick
3 Intermediate shaft
13. sider the dimension 74 mm and keep on knocking until
this dimension has been reached.
14. Prior to assembly, check if orientation of the coupling ele-
ments (3) between engine and intermediate shaft is cor-
rect. Align if necessary.
15. Join tamping pick and engine.
16. Insert screws into flange and tighten.
17. Degrease the two screws that attach the coupling element
of the intermediate shaft to the engine shaft (under rubber
bellow) and apply high-strength screw retention.
18. Insert the two screws (1) for the engine shaft and tighten
with 20 Nm.
9.7 Signs and labels
► Regularly check if signs and labels are present and in good
condition.
► Replace signs and labels if necessary.
74 mm