ROBEL 13.80, Original Operating Instructions, Page: 19 / 93

Page 15
13.80
RAIL CUTTER
5 START-UP
5.1 Personal protective equipment
Basic health and safety requirements must be observed!
•
Wear protective helmet and eye protection!
•
Wear suitable hearing protection for high-frequency sound!
•
Wear safety boots with steel reinforcement!
•
Wear tight fitting clothing in the lower leg and arm area!
5.2 Checks
•
Before using the machine, the operating resources must be checked and
supplemented, where necessary.
•
Check if cables and connections are tightly connected and undamaged
(check by view).
•
Checking the cutting disk to make sure it is fixed firmly (check by hand)!
Danger!
•
When using cutting disks whose attachment borehole’s
diameter is in inches, the corresponding adapter ring
must be installed together with the securing ring!
•
Cutting disks which are loose are HIGHLY
DANGEROUS!
•
Never work with a cutting disc that has fallen onto the
ground.
•
Do not use a faulty protective cover or one that is
incorrect-ly mounted
Visual checks:
▪
Check the cutting disk for cracks or other damage (cavities) and sufficient
diameter.
▪
Make sure safety devices are fitted properly and undamaged and that drive
belts for the cutting disk are undamaged and sufficiently tensed .
▪
Under no circumstances use defective wheel protection or wheel protection
which has not been correctly mounted.
▪
Make sure the joint of the guiding frame can move freely (can be easily folded
by hand and the thread runs well).
▪
The tommy screw must move freely.