ROBEL 13.80, Original Operating Instructions, Page: 17 / 93

Page 13
13.80
RAIL CUTTER
4 OPERATING CONDITIONS
From -20°C to a maximum of +70°C (motor temperature) with minimal power
losses at an installation height of up to 100 m mean sea level.
Risk of damage!
•
Excessive solar radiation may overheat the machine to way
above +70°C. Electrical safety is endangered by distortion
of the housing.
4.1 Storage
The temperature range for storing the cutter is -20°C to +70°C. The storage
area must be dry and free of dust.
•
Store the abrasive cutter in a lockable room, so that it is inaccessible to
children or unauthorised persons.
•
Do not store or transport the abrasive cutter with a mounted cutting disk.
Storage of abrasives and cutting-off wheels
•
Store the abrasives in appropriate shelves or containers in such a way that,
on the one hand, they cannot be damaged and, on the other hand, they can
easily be unloaded without relocating.
•
Older stock ought to be used first.
•
Please mind the following:
−
Keep the abrasives in a dry and frost-free place.
−
Store cutting-off wheels on an even support without intermediate padding
and weigh them down by means of a steel-plate or a cast iron plate.
−
Pile cylndrical abrasives with soft intermediate padding.
−
Store tall and straight abrasives in upright position and prevent them from
rolling.
−
Keep small abrasives in adequate containers.
Correctly stored, the abrasives' shelf life is 3
– 5 years (see
expiry date on respective label).