6. Commissioning
6.6
Adjusting the spacing of the guide rollers
The spacing of the guide rollers of the standard guiding system
can be adjusted in steps of 2 mm using 4 distance discs. Upon
delivery the 4 distance discs are mounted inside and the spac-
ing is at maximum as a result.
Reducing the spacing Tools, aids and materials:
•
AF 13 open-ended spanner
1. Use the open-ended spanner to unscrew the hexagon screw
(1) counter-clockwise on the guide roller of the standard
guiding system.
Fig. 47: Adjusting the guide roller spacing
2. If present, remove the outer distance disc (2).
3. Remove the guide roller (3).
4. Remove the desired number of distance discs (4) from the
shaft (5).
5. Push the guide roller back onto the shaft.
6. Put the removed distance discs on the outside and tighten
the hexagon screw clockwise.
Increasing the spacing 1. Proceed as described above but this time move the dis-tance
discs from the outside to the inside.
47