LTS-
100DS User manual
9
The device enters sleep mode after entering for 5 minutes. The vibration cannot be awakened. It can
be sent to a single working mode continuously.
Work mode, automatic operation mode instructions change the working state to wake the device.
3.13.2 Automatic Operation Mode (Default)
The device did not set any alarms. There was no operation after 5 minutes and the device went to
sleep: GPS was off and GPRS was off. There is a phone call and a text message or a shock will instantly
wake the device.
Automatic working mode command format: auto123456 reply: Set OK
3.13.3 Continuous Mode (Sleep Off)
Continuous operating mode instruction format: nslp123456 Re: Set OK
3.13.4 Upload Interval Settings (120 seconds by default)
Upload interval setting instruction format: upmove123456 120 reply: Set OK
3.14 Arm/restart and factory reset
3.14.1 SMS fortification: SF reply: SF OK
SMS Disarm: CF Reply: CF OK
3.14.2 Reboot Device SMS Command: CQ
Re: system reset ok!
3.14.3 Restoring Factory Settings SMS Command: FORMAT
Re: restore the factory value is successful, please re-bind the owner number!
3.15 Query device status
SMS command: CXZT
Re: XM_YW_GT07_SW_12.0 2016/12/20 21:34
ID: 6170697545
IP: 106.3.230.234 8185
BAT: 6
APN: CMMTM
Mode:A
UP: 120
GPS: A-30-00
GSM:20
The order is: device software version; ID; IP; BAT: power level; move: work mode, M is single, A is
Automatic, C is continuous; UP: Upload interval; GPS: GPS signal value; GSM: GSM signal value.
