5
Using the product
The measurements taken on this device are for your information only and
are not a substitute for a medical examination.
Before taking a measurement, it is recommended that the thermometer is
stored at room temperature for at least 30 minutes. Failing to do so may
cause inaccuracy. Please make sure all measurements are taken indoors.
We recommend taking any measurements while rested; taking
measurements immediately after exercise could result in inaccurate results.
Enabling/disabling the talking function
To enable the talking function, ensure that the thermometer is switched on
and then press and hold the
TALK
button until you hear two beeps. The
sound icon will appear on the display. Press the
TALK
button again once to
confirm that the talking function is enabled.
To disable the talking function, ensure that the thermometer is switched on
and then press and hold the
TALK
button until you hear one beep. The
sound icon on the display will disappear. During measurement, with the
talking function disabled, the thermometer will beep to indicate that the
measurement has been taken and will then show the result on the display.
To measure the temperature in the ear
Important notes:
•
It is recommended to clean the ear before taking a measurement.
•
A measurement taken in the right ear may differ from a measurement
taken in the left ear. It is advised to always take the temperature in the
same ear.
•
If you are wearing a hearing aid or ear plugs, remove them and wait 30
minutes prior to measuring the temperature in the ear.
•
If you are currently using ear drops or other ear medications that have
been placed in the ear canal, take the measurement in the other
untreated ear.
The first time you use the thermometer it is recommended to check the
temperature in the same ear three times. When repeating a measurement
wait about 30 seconds between measurements.
