1
AutoDrop eye drop dispenser
DH75
Please retain these instructions for future reference. These instructions are also
available in other formats.
Special warning
When using eye drops please follow your doctor’s instructions. Continue taking
your medication until instructed otherwise by your doctor. If you need assistance
speak to your doctor or practice nurse.
After the first drop, wait 5-10 minutes before inserting any further eye drop
medication, to prevent the first from being washed away.
Never use drops after the expiry date.
Hand in any unused or expired medicines to your local pharmacist.
If you use soft contact lenses, remove them before inserting eye drops and wait
at least 15 minutes before re-inserting them.
Store eye drops and all medicines out of the reach of children.
General description
Developed in collaboration with RNIB, Autodrop has been designed to assist in the
instillation of eye drops. It clips on to the majority of eye-drop bottles and features a
small "lip" which holds the lower eyelid open to prevent blinking when administering
the drops. The design of the AutoDrop also allows it to hold the bottle at the correct
angle.
Using the product
Open Autodrop (the lid opens easily with a click). Loosen the cap from the eye drop
bottle but do not remove completely at this stage.
Locate the keyhole slot around the base of the bottle neck below the thread. Remove
the eye drop bottle cap and slide the lid of the Autodrop around the keyhole slot at the
base of the bottle neck.
Close Autodrop. Do not force the bottle nose into Autodrop, it should close easily.
Hold down your lower eyelid. Place Autodrop over the eye with the lip of it resting
against your cheek.
