22
Step-by-Step Connections for the IVS SDA-930
WARNING:
Failure to set up your IVS SDA sequentially according to the steps below
may cause configuration difficulties or loss of functionality.
Refer to
for the following connections:
1. Connect the audio output (
6a
) to your display’s audio input or to external audio
system/speakers.
2. Insert a standard Ethernet cable into the Ethernet port (
9
).
3. If you need VGA output, connect the male end of the DVI-to-
VGA adapter to the DVI-I connector (
16
) and rotate the pin
screws clock-wise to secure the adapter. Connect the female
end of the adapter to a video connection.
4. If you need a second DVI connection, connect the smaller
end of the DisplayPort-to-DVI adapter to one of the two displayports (
15
). Connect
the other end of the adapter to a digital display device.
Note:
If you ever need to
remove the Display-Port-
to-DVI adapter, grasp the
adapter with your thumb
and index finger at the
point of connection, then
squeeze the adapter from
below to unlock it and
release the connection.
5. Connect the female end of the power cord to the power input (
5
) and plug the
other end into a standard AC outlet.
To remove, squeeze
the adapter from
below to release the
connection.
