6. Quick Start (MADI)
Follow this procedure to get running quickly!
1. Load
Preset 16
(Factory settings) from the
STATE
section
2. In the
CLOCK
section, choose a sample rate and verify that the device is clock master or that the
chosen clock source is in sync.
3. After connecting an analog signal, adjust its reference level as needed in the
INPUT
section
4. Open the tab of the preferred digital output in the
OUTPUT
section and choose "Analog 1-16" as
source.
5. Set the preferred reference level in the analog configuration tab of the
OUTPUT
section
6. Choose a digital input source for the analog outputs in the
OUTPUT
section
RME M-1610 Pro User’s Guide
6. Quick Start (MADI) |
22
