9.1.6. Inverting the Phase of an Analog Input Signal
The phase of analog input signals can be inverted at the input.
To toggle the phase of an input signal
1. Use the button next to the corresponding input to access its settings.
2. Press the third button two times in quick succession (double press). The phase button Ø will become
yellow.
The setting persists even if the input source is toggled between XLR and TRS.
9.1.7. Gain Groups
The gain level of two or more channels can be linked temporarily or permanently. When part of a group,
gain is increased or decreased as an
offset (in dB)
to the previously set individual gain levels. The offset
is not stored itself - the adjustment is immediately applied to all member channels. Each time a gain
group is accessed, the offset starts at 0 dB. If a gain of a channel is at its lowest setting (0 dBu) and a
negative offset is created in a group that comprises the channel, the offset is ignored.
Group Overview
Level meters
Add channels to group
Save group
Current offset
Linked gains
Gain indicator
RME 12Mic User’s Guide
43
| 9.1. Analog Inputs
