To adjust the input line level on the web remote:
1. In the web remote, open the analog input port. Each input is represented with a channel strip.
2. Press the
48V
button in the corresponding channel strip.
Phantom power settings are not shown when the channel is switched to TRS input.
8.1.4. Switching Between XLR and TRS Inputs
The input channels 1-4 have "combo-jacks" that support both XLR and TRS connectors. When a plug is
inserted, the corresponding input must be selected in the input settings. XLR is the default choice in the
factory preset.
In order to prevent damage due to inrush current, the phantom power setting will be
deactivated when toggling to TRS.
The current input mode is shown on the standby screen:
RME 12Mic-D User’s Guide
51
| 8.1. Analog Inputs
Summary of Contents for 12Mic-D
Page 2: ...RME 12Mic D User s Guide...
