25
Third page:
Display
3/4
HL#
330°11’38”
V%#
-8.14%
Z#
-0.185m
PT:1
HT:
1.000m
Fourth page:
Display
4/4
N#
-1.974
E#
-1.128
Z#
-0.185
PT:1
HT:
1.000m
To change the height of the target (HT), temperature, or pressure, press [HOT].
Settings that relate to corrections (T-P, Sea level, C&R) are included in the job settings. These settings
are job-specific. Changing of any item will create a new job or shut off all jobs.
The maximum capacity of R2 Serial is defined by the data type. Up to 10000 points can be collected at
most.
3.5 ANGLE MEASUREMENT
To open the Angle menu, press [ANG] in the basic measurement screen.
STEP
OPERATION
DISPLAY
a.
In BMS press [ANG] to enter angle
observation function.
[ANG]
Display
1/4
HA#
30
°
21
’50”
VA#
273
°
13
’45”
SD#
PT:1
HT:
1.000m
b.
To select a command from this menu,
press the corresponding number key
and [ENT].
Angle
HA: 273
°
13
’45”
1.0SET
4.F1/F2
2.Input
5.Hold
3.Rept.
