RLE Technologies WiNG-MGR User Manualline Download Page 56

Page: 56 / 102

WiNG-MGR User Guide

800.518.1519

Web Interface

3.7.2 Firmware

RLE releases firmware upgrades that add new features and functionality to the WiNG-MGR.

Firmware updates are free of charge. Download firmware updates from the RLE website and

load them onto your system here.

Figure 3.27

Firmware Page

Attribute

Description

Firmware Updates

Update Firmware

Firmware updates are available, free of charge, on the RLE

Technologies website. When new firmware is available for the

WiNG-MGR, download the file from the website and upload the

WiNG-MGR main firmware file here.

System Administration

Upload A

Configuration File

Use this menu option to upload a system configuration file to the

WiNG-MGR.

This is a particularly useful option if you’re configuring more than one

WiNG-MGR and would like them to have the same settings, or if

you’ve updated the firmware on your unit and need to re-upload your

current system configuration file.

Download System

Configuration File

If you are going to update the firmware on a WiNG-MGR, you should

always download the configuration file first. This provides you with a

backup of your current configuration, just in case something happens

during the update process.

If you’re configuring more than one WiNG-MGR and would like them

to have the same settings, you can configure one unit, download the

configuration file, and then upload it to another WiNG-MGR.

Use this button to download this unit’s configuration file.

Table 3.18

Firmware Configuration Options

Summary of Contents for WiNG-MGR







































































































Search results

Summary of Contents for WiNG-MGR

Reviews:

Brands by name

Popular brands

RLE Technologies WiNG-MGR, User Manualline

Search results

Summary of Contents for WiNG-MGR

Reviews:

Brands by name

Popular brands