82-5201-01 Email/Text Generator Operator’s Manual
Configuration
•
15
Power On and Input Emails/Texts
The device will generate emails and/or texts when the device powers on and/or when any of the
contacts close or open. You must make email/text settings for each event type (Power On, Input 1
Close, Input 1 Open, etc.) individually, even if they are all going to the same email address and/or
phone number. If you don’t want emails/texts sent for a particular event type, leave the fields
blank.
If you are using an Outlook account and want to send emails/texts to more than one recipient, you
will need to verify the Outlook email address the first time the email/text generator sends an
email/text. The first attempt at sending an email/text will not be successful, and Outlook will send
an email to your Outlook email address, asking you to verify your account.
1. Subject: Enter the subject title for the email/text generated from the event type. The text must
be alphanumeric and cannot contain any special characters.
2. Message Body: Enter the body for the email/text generated from the event type. The text must
be alphanumeric and cannot contain any special characters.
NOTE:
The Power On message includes a WiFi signal strength percentage in
addition to any entered text.
