OX-04 Operator’s Manual
Chapter 4: Display Mode
•
33
Last Successful Bump Test Date (BP.DATA)
The
BP.DATA
screen shows the date of the last successful bump test. This screen only appears if
BP.RMDR
is set to
ON
(factory setting is
OFF
).
1. After entering Display Mode, press and release POWER MODE until the
BP.DATA
screen
sequence appears.
2. Press AIR to enter the
BP.DATA
screen. The date of the last successful bump test displays.
3. When you are done viewing the last bump test date, press and release POWER MODE to
return to the
BP.DATA
screen in Display Mode.
Date/Time Screen (DATE)
The
DATE
screen shows the instrument’s date and time.
Temperature Screen (TEMP)
The
TEMP
screen shows the surrounding area’s temperature.
DISP
BP .DATA
DISP
YES / AIR
DISP
NO /MODE
2019
10.24
BP .DATA
2020
4.21
10:40
25C
TEMP
