04 Series for CO(-H2)
Chapter 5: User Mode and Calibration • 49
Setting the Calibration Values in CAL--P
1. While in User Mode, press AIR to scroll to
GAS CAL
.
2. Press and release POWER MODE. The
AIR
item appears.
3. Use AIR to scroll to the
A-CAL
item (
E-CAL
if
E-CAL
in User Mode is set to
ON
).
4. Press and release POWER MODE. The Auto Cal screen for the gas assigned to Cylinder
A displays.
5. Use AIR to scroll to
CAL--P
.
6. Press and release POWER MODE. The gas name displays.
7. Use AIR to scroll to the gas whose calibration gas value you want to change.
GAS CAL
A-CAL
CO
50
A-CAL
ppm
CO
50
CYL A
ppm
CAL-P
CO
CAL-P
ppm
AIR
AIR
AIR
CO
CAL-P
ppm
H2
CAL-P
ppm
ESCAPE
