04 Series for CO(-H2)
Chapter 4: Display Mode • 31
2. Press AIR to enter the
CAL.DATA
screen. The date of the last successful calibration
displays.
3. Press and release POWER MODE to return to the
CAL.DATA
screen in Display Mode.
Last Successful Bump Test Date (BP.DATA)
The
BP.DATA
screen shows the date of the last successful bump test. This screen only
appears if
BP.RMDR
is set to
ON
(factory setting is
OFF
).
1. After entering Display Mode, press and release POWER MODE until the
BP.DATA
screen sequence appears.
2. Press AIR to enter the
BP.DATA
screen. The date of the last successful bump test
displays.
3. When you are done viewing the last bump test date, press and release POWER MODE to
return to the
BP.DATA
screen in Display Mode.
Date/Time Screen (DATE)
The
DATE
screen shows the instrument’s date and time.
2019
10.24
CAL .DATA
DISP
BP .DATA
DISP
YES / AIR
DISP
NO /MODE
2019
10.24
BP .DATA
2020
4.21
10:40
