AirLink 7010 Gas Monitor Operator’s Manual
Chapter 6: Advanced Configuration Menu • 33
Adjusting the Lower Screen’s LCD Contrast
1. Press
ADD
(increase) or
SUB
(decrease) to manipulate the lower screen’s LCD contrast.
2. Press
MENU
.
Restore Factory Default Settings
1. Press
ADD
or
SUB
(Yes/No—as indicated on the display screen) to set the unit back to the
factory's default settings. To leave the settings as they are, press
MENU
(Next).
Factory settings are:
•
Channels 1-28 set to WireFree
•
Channels 29-32 set to Wired
•
Relays set at “10, 15, 20 and 25”
•
All relays set to “Auto Reset” / “Increasing”
•
Modbus Output Baud set at 9600
•
Radio Timeout set to 10 minutes
•
Network ID set to 5
•
Secondary Monitor
