FEB. 2020
IMS01T43-X1
Plug-in connector for SRZ connector type module
SRZP-01/SRZP-02/SRZP-03
INSTRUCTION MANUAL
[Accessories for SRZ]
All Rights Reserved, Copyright
2020, RKC INSTRUMENT INC.
The first edition: FEB. 2020 [IMQ00]
HEADQUARTERS: 16-6, KUGAHARA 5-CHOME, OHTA-KU TOKYO 146-8515 JAPAN
PHONE: 03-3751-9799 (+81 3 3751 9799)
E-mail: [email protected]
Website: https://www.rkcinst.co.jp/english/
For the SRZ connector type module, use the following our connector (plug) [sold separately].
SRZP-01 (Front-screw type)
SRZP-02 (Side-screw type)
SRZP-03 (Push in type)
Used wire specifications:
Lead wire type:
Solid and twisted wire:
AWG 24 [cross-section: 0.205 mm
2
] to
12 [cross-section: 3.309 mm
2
])
Used wire specifications:
Lead wire type:
Solid:
AWG 28 [cross-section: 0.081 mm
2
] to
12 [cross-section: 3.309 mm
2
])
Twisted wire:
AWG 30 [cross-section: 0.051 mm
2
] to
12 [cross-section: 3.309 mm
2
]
Used wire specifications:
Lead wire type:
Solid and twisted wire:
AWG 26 [cross-section: 0.129 mm
2
] to
12 [cross-section: 3.309 mm
2
])
Stripping length: 9 to 10 mm
Stripping length: 7 to 8 mm
Stripping length: 10 to 11 mm
Connection method
1.
Loosen the screw with a flat blade screwdriver.
2.
Insert the wire into the wire insertion hole.
3.
Tighten the screw with the flat blade screwdriver.
Screw size: M2.5
Recommended tightening torque: 0.43 to 0.50 N
･
m (4.3 to 5.0 kgf
･
cm)
Connection method
1.
While pressing the button with the
flat blade screwdriver, insert the wire
into the wire insertion hole.
2.
The wire is fixed to the connector
when the flat blade screwdriver is
released from the button.
After the wire has been connected, pull the wire gently to ensure it is firmly secured.
Dimensions (When connector plug is fitted)
SRZP-01 (Front-screw type)
SRZP-02 (Side-screw type)
SRZP-03 (Push in type)
(Unit: mm)
9 to 10 mm
7 to 8 mm
10 to 11 mm
SRZP-01
76.9 2.9
99
100
5
2.9
SRZP-02
76.9
89.7
100
5
SRZP-03
76.9 2.9
97.4
100
5
Screw
Screw
Wire
i
nsertion
hole
Wire
insertion
hole
Button
Wire
insertion
hole