MINI EFFECT GIZMO X QUICK START
Front Panel
Loops 1 through 6
- These buttons turn audio loops 1 through 6 on and o
ff
. Each button lights up to indicate that the
corresponding audio loop is active. Audio loops are used to switch your pedals in and out of the signal path.
Switches 1 and 2
- These buttons turn function switches 1 and 2 on and o
ff
. Each button lights up to indicate that the
corresponding function switch is active. Function switches are used to control amp channel switching or other features.
Bu
ff
er
- When pressed briefly, this button will turn the input bu
ff
er on and o
ff
. The LED is green when the bu
ff
er is on and
yellow when it’s o
ff
. When held down for 3 seconds, this button stores the current state of all switches to non-volatile
memory. The buttons will flash to confirm that the state has been stored. Please note that the store function doesn’t work
until a preset has been selected from a MIDI controller.
Connections
In this basic 6 pedal configuration, all you need to do is connect each loop send to a pedal input, and each loop return to
the same pedal’s output. Then, connect your guitar, amp and MIDI controller and you’re ready to go!
The MIDI In and MIDI Out connectors can accept either 5-pin or 7-pin MIDI cables. 7-pin cables are only needed if you want
to phantom power a compatible MIDI controller. With the included power supply, the Mini E
ff
ect Gizmo X can power a MIDI
controller that takes 9VDC at up to 800mA of current.
Please note!
When phantom powering a Mastermind GT, use the Mastermind GT’s power supply to power the Mini E
ff
ect
Gizmo X. The power supply included with the Mini E
ff
ect Gizmo isn’t powerful enough to power the Mastermind GT.
7/29/21
MUSIC
TECHNOLOGY
SND1
RTN1
SND2
RTN2
SND3
RTN3
SND4
RTN4
SND5
RTN5
SND6
RTN6
FN SW
OUT
TUNE OUT
IN
MIDI OUT
MIDI IN
9VDC
200mA
IN
OUT
Guitar
MIDI Controller Out
AC Adapter
RJM Music Technology, Inc.
www.rjmmusic.com
Mini Effect Gizmo X Wiring Diagram
6 pedals in front of amp
This is the simplest connection method, 6 pedals wired
in front of an amp's input.
To MIDI input of
next MIDI device
(if any)
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
Footswitch input
(optional connection)
1
6
5
4
3
2
MINI EFFECT GIZMO
LOOPS
SWITCHES
BUFFER
RJM MUSIC TECHNOLOGY
HOLD TO STORE
2
1
®
