RJM MINI EFFECT GIMZO X, User Manual, Page: 18 / 26

FUNCTION SWITCH INVERT
When controlling devices using a function switch, you may find that the thing you’re controlling is turned
on when the function switch LED is o
ff , and vice-versa, If this is the case, you can invert the function
switch to fix the situation.
Hold the Switch 2 button while powering the Mini E ff ect Gizmo X on. The LEDs on the Mini E ff ect Gizmo
will cycle a few times, then will turn o ff . The Bu ff er LED starts flashing at this point. Once that happens,
you can release the button. Now, press the Function Switch button or buttons that need to be inverted.
Any function switch LED that’s on indicates an inverted switch, and an LED that’s o
ff indicates a normal
(non-inverted) switch.
Once you’ve set the invert options, press the Bu ff er button. The Mini E ff ect Gizmo is now in normal
operational mode.
FUNCTION SWITCH MOMENTARY
Some devices require momentary switching, where the switch is turned on briefly, then turned o ff , each
time the switch is activated. Normally, the switches are latching, where they turn on or o ff as needed.
Momentary switching is rarely needed, but we’ve provided the option for those cases where it’s
necessary.
Hold the Switch 3 button while powering the Mini E ff ect Gizmo X on. The LEDs on the Mini E ff ect Gizmo
will cycle a few times, then will turn o ff . The Bu ff er LED starts flashing at this point. Once that happens,
you can release the button. Now, press the Function Switch button or buttons that need to be set to
momentary. Any function switch LED that’s on indicates a momentary switch, and an LED that’s o
ff
indicates a normal (latching) switch.
Once you’ve set the momentary options, press the Bu ff er button. The Mini E ff ect Gizmo is now in normal
operational mode.
FUNCTION SWITCH GROUPING
In some rare cases, function switches need to be grouped, so that turning on one function switch causes
the other function switch to turn o
ff . Typically, this is used in conjunction with the momentary setting
described above.
Hold the Switch 4 button while powering the Mini E ff ect Gizmo X on. The LEDs on the Mini E ff ect Gizmo
will cycle a few times, then will turn o ff . The Bu ff er LED starts flashing at this point. Once that happens,
you can release the button. Now, press the Function Switch button or buttons that need to be set to
momentary. Any function switch LED that’s on indicates a grouped switch, and an LED that’s o
ff indicates
a normal (ungrouped) switch.
Once you’ve set the grouping options, press the Bu ff er button. The Mini E ff ect Gizmo is now in normal
operational mode.
18