RJG Sensor PreCheck, User Manual

Page: 18 / 42

OVERVIEW | RJG, INC. SENSOR PRECHECK 12
MANUAL STRAIN GAGE SENSOR FORCE TEST
The manual strain gage sensor force test tests for
1
Basic and Device Force . The operator must physically
press on the sensor(s) being tested in order for the
Sensor PreCheck to evaluate if the sensor is detecting
force.
NOTE The application will time out if no signal is
received from the sensor within a specified length of time;
be ready to apply force to the sensor(s).
The manual strain gage sensor force test will display a
2
test in progress page, then a
3
Signal Detected OR
4
No Signal Detected screen to indicate if a sensor
signal is or is not detected.
1
4
3
2