RJG Lynx LS-B-127-125, Product Manual

Page: 10 / 66

Lynx™ Strain Gage Button Sensors LS‑B‑127‑50/125/500/2000 | Product Manual 2 RJG, Inc.
SENSOR AND EJECTOR PIN SIZE
SELECTION CHARTS
The charts below are only a guide. In order to assure correct sensor selection for an application,
please contact RJG.
Locate the pin size that will be used and match it to the location on the part (near the end of fill or
near the gate). The recommended sensor is the intersection of the row and column.
1.
Imperial Units
NORMAL PRESSURE HIGH PRESSURE
Pin Size Sensor Model Sensor Model
3/64 LS‑B‑127‑50 LS‑B‑127‑50
1/16 LS‑B‑127‑50 LS‑B‑127‑50
5/64 LS‑B‑127‑50 LS‑B‑127‑125
3/32 LS‑B‑127‑125 LS‑B‑127‑125
7/64 LS‑B‑127‑125 LS‑B‑127‑125
1/8 LS‑B‑127‑125 LS‑B‑127‑500
9/64 LS‑B‑127‑500 LS‑B‑127‑500
5/32 LS‑B‑127‑500 LS‑B‑127‑500
3/16 LS‑B‑127‑500 LS‑B‑127‑500
7/32 LS‑B‑127‑500 LS‑B‑127‑500
1/4 LS‑B‑127‑500 LS‑B‑127‑2000
9/32 LS‑B‑127‑2000 LS‑B‑127‑2000
5/16 LS‑B‑127‑2000 LS‑B‑127‑2000
11/32 LS‑B‑127‑2000 LS‑B‑127‑2000
3/8 LS‑B‑127‑2000 LS‑B‑127‑2000
13/32 LS‑B‑127‑2000 LS‑B‑127‑2000
7/16 LS‑B‑127‑2000 LS‑B‑127‑2000
1/2 LS‑B‑127‑2000 ‑
9/16 ‑ ‑
5/8 ‑ ‑