- 31 -
The pressure trigger can not be used in the following tool types due to the system:
•
RK-797C-1
4.2.12
QuickRiv-Technology
The tool has a monitor which automatically recognizes when the rivet mandrel breaks and
returns the tool back into the starting position. Depending on the traction head or
fastener, the break detection must be deactivated. This can be done in the Freeset
Manager Software.
In order to deactivate the break detection read out the tool in the Freeset Manager
Software as described in chapter 4.3 on page 35.
•
Click
„programming“
•
Select the program, for example program 1, in which the pressure trigger should be de-
activated
•
Click
„option“
•
Remove the check mark next to
„QuickRiv
-
Technology“
(see image)
•
Click
„write“