Steps:
1. Place the Chair Back Assembly (A) on a soft surface such as a blanket or carpet.
2. Attach the Chair Seat (B) to the Back Assembly by using the 3-1/8" long Bolt (D) Spring
Washer (G) and Flat Washer (H) into the back corners of the Seat and 1-3/4" long Bolt
(E) Spring Washer (G) and Flat Washer (H) into the middle of the Seat, as shown . Do
not fully tighten Bolts until after next step.
Riverside
Components and Hardware List (for one chair)
FURNITURE
Made in Viet Nam
Page 1 of 2
Sophie
Dining Room
Assembly Instructions
