RiverRidge Somerset 06-039 Page 7 Assembly Instructions Manual Download

Page: 7 / 10

STEP 5

1.Screw 4 cam bolts (B) into the pre-threaded holes on bottom board (8).

2.Insert 4 wood dowels (A) into dowel holes on bottom board (8).

3. Attach bottom board (8) to left side panel (4) and right side panel (3) by inserting cam bolts (B) and wood

dowels (A) into holes on left side panel (4) and right side panel (3).

4. Insert 4 cam locks (C) into cam lock holes on left side panel (4) and right side panel (3) and rotate

clockwise to secure cam bolts (B) in place.

5. Attach magnet (H) to top board (7) by inserting 2 wood screws (H) through holes on magnet (H) and tighten

to bottom of top board (7).

6. Screw 4 cam bolts (B) into pre-threaded holes on top board (7).

7. Insert 4 wood dowels (A) into dowel holes on the bottom of top board (7).

8. Attach top board (7) to left side panel (4) & right side panel (3) by inserting wood dowels (A) and cam

bolts (B) into dowel holes and cam lock holes on left side panel (4) and right side panel (3).

9. Insert 4 cam locks (C) into cam lock holes on left side panel (4) and right side panel (3) and rotate clockwise to

secure cam bolts (B) in place.

Summary of Contents for Somerset 06-039










