Configuring LAN-Side Internet Breakout on SteelHead SD | 89
Troubleshooting
4. Specify the traffic rule options. For details, see the
SteelConnect Manager User Guide
.
Figure 9-4. Configuring internet breakout in a traffic rule
5. Click the search selector in the Path preference field and select Underlay.
6. Click
Submit
.
Troubleshooting
Enter the
show connections
CLI command to verify that the TX path is underlay. The Outgoing Interface
will show the LAN interface, which means the default route was learned from the LAN interface. for
example:
show connections
Enter the
tcpdump
command to run a packet trace on the LAN interface, for example:
tcpdump -i lan0_0 port 5005 -nn
For details on the SteelHead SD CLI, see the
SteelConnect Manager User Guide
.
Summary of Contents for SteelHead 3070-SD
