54 | Installing Network Cards in SteelHead GX and xx70, SteelHead SD, SteelCentral, Interceptor 9600, and SteelFusion Core 3500
Supported cards for SteelHead GX, SteelHead CX xx70, SteelHead SD 3070-SD, and Interceptor 9600 appliances
SteelHead GX10000
*The Four-Port 10-GbE Fiber SR/LR NICs have a power connector cable attached that is not used in the
Riverbed SteelHead platforms. The SteelHead systems are designed to fully power these NICs through
the interface bus.
**HHHL = Half Height, Half Length; FHHL = Full Height, Half Length; FH7.6” = Full Height, Length 7.6”;
FH9.6” = Full Height, Length 9.6”.
NICs
Size (**)
Manufacturing part #
Orderable part #
Required software
Two-Port 10-GbE Fiber SR
FHHL
410-00302-03
NIC-1-010G-2SR-BP
RiOS 9.6.0.gx1 or
later
Two-Port 10-GbE Fiber LR
FHHL
410-00301-03
NIC-1-010G-2LR-BP
RiOS 9.6.0.gx1 or
later
Four-Port 10-GbE Fiber SR*
FH7.6”
410-00191-01
NIC-1-010G-4SR-BP
RiOS 9.8.0 or later
Four-Port 10-GbE Fiber LR*
FH7.6”
410-00190-01
NIC-1-010G-4LR-BP
RiOS 9.8.0 or later
Four-Port 10-GbE Copper
FH9.6”
410-00195-01
NIC-1-010G-4TX-BP
RiOS 9.9.0 or later
Four-Port 10-GbE DAC
FH7.6”
410-00197-01
NIC-1-010G-DAC-BP
RiOS 9.9.0 or later
Two-Port 40-GbE Fiber SR
FH9.6”
410-00193-01
NIC-1-040G-2SR4-BP
RiOS 9.7 or later
Two-Port 40-GbE Fiber LR
FH9.6”
410-00194-01
NIC-1-040G-2LR4-BP
RiOS 9.7 or later
10-Gbps Compression
Offload Card
FHHL
410-00055-02
OFL-1-CMP-2
RiOS 9.6.0.gx1 or
later
Four-Port 1-GbE Copper
Base-T Bypass
HHHL
410-00115-11
NIC-1-001G-4TX-BP
RiOS 9.9.0a or later
Four-Port 1-GbE Fiber SX
Bypass
FHHL
410-00122-01
NIC-1-001G-4SX-BP
RiOS 9.9.0a or later
