8
4. INSTALLATION
When assembling the main body of the camera and its dome
cover, make sure they fit each other into place.
Note
i
1)
Place the installation template
that is provided in the package on
the desired position of installation.
2)
Attach the waterproof silicon
band on the bottom plate of the
device.
3)
Drill three holes on the
template and insert anchor blocks
into the holes. Fasten the camera
with screws.
4)
Make sure the cables are
properly connected by checking
the LED button.
5)
Adjust the lens position by
referring to
4.2. Setting the Lens
Position
.
6)
Put the dome cover on the
main body of the camera. Make
sure the main body and the cover
fit each other into place.
7)
Fasten the cover with screws.
