11
Preparation
• Remove the left-over holder (8)
and the slice carriage (7).
Removing the rotary blade:
Open the blade catch (9), by
turning it in a clockwise direction.
Take hold of the rotary blade
at its rotational centre and
remove it.
Cleaning after each use
• Wipe down the housing and
all removed parts, including the
rotary blade, with a damp cloth.
Occasional cleaning
• Give all removed parts, includ-
ing the rotary blade, a thorough
wash in warm soapy water (not in
the dishwasher!).
•
Clean the housing behind the
blade using a dry cloth/brush.
Note:
Do not use any abrasive cleans-
ers, sponges with rough surfaces
or hard brushes.
• Dry all parts that you have
washed.
•
Grease the rotary blade's gear
wheel with a little Vaseline.
Assembling the appliance
• Carefully insert the rotary
blade.
•
Insert the blade catch.
•
Close the blade catch by
turning it in an anticlockwise
direction.
•
Mount the slice carriage (7).
MAINTENANCE
Your food slicer is maintenance-
free. However, we recommend
that you occasionally apply a little
Vaseline to the rails of the slice
carriage to keep them lubricated
and ensure that the carriage
continues to move easily.
STORAGE
Keep the appliance out of the
reach of children.
To store the cable, always use
the cable compartment integrated
into the appliance.
DISPOSAL
At the end of its service
life this product may not
be disposed of as part of
normal domestic waste.
It must be taken to a dedicated
collection point for recycling
electrical and electronic devices.
This is referred to by the symbol
on the product, the operating
instructions or the packaging.
The materials can be used
again in accordance with their
identification. The reusage,
material-sensitive recycling or
other forms of recycling of old
appliances enables you to make
a vital contribution to protecting
our environment.
Please consult with the disposal
office at your local authority.
REACH DIRECTIVE
See www.ritterwerk.de
SPECIAL ACCESSORIES
A non-toothed rotary blade is also
available specifically for sliced
meat, sausage and ham.
SERVICE, REPAIRS AND
SPARE PARTS
Please contact your local after-
sales service for all service,
repairs and spare parts matters!
See www.ritterwerk.de
TECHNICAL DATA
This appliance complies with
the following regulations and
directives:
– 2014/30/EU
– 2014/35/EU
– 1935/2004/EG
– ErP 2009/125/EG
– 2011/65/EU
The appliance thus complies with
the CE specifications.
Mains voltage/power consump-
tion: Refer to the type label on the
underside of the appliance.
Slice thickness:
0 mm to approx. 14 mm
WARRANTY
This ritter appliance comes with
a two-year manufacturer’s war-
ranty, starting with the date of
purchase and in accordance with
the EU warranty directives. In
the event of a warranty claim or
for servicing, the appliance must
always be sent to the appropriate
national customer service centre.
English
Summary of Contents for markant 01
Page 5: ......