Rittal RCM Inline Meter
25
EN
6.1
Settings via the display
If the display is dark: Press any key. A menu will appear show-
ing the power per phase.
Press the "Esc" key (fig. 5, item 2) to display the
Rittal
main
menu.
Select the "Setup" entry and press the "Enter" key to confirm
your selection (fig. 5, item 1).
Select the "IP Configuration" entry and press the "Enter" key to
confirm your selection. The menu for entering your security PIN
will appear.
Keep pressing the "Up" key (fig. 5, item 5) or the "Down" key
(fig. 5, item 4), until the required digit is displayed in the first po-
sition of the PIN.
Press the "Enter" key to move to the second position of the
PIN.
