10.2
Inspection, maintenance and repairs by the Authorized Distributor
L
WARNING
Risk of injury due to improperly executed repair tasks!
Improper repairs can cause severe injuries and significant property damage.
● Repair tasks must only be performed by specifically qualified personnel.
● As a general rule, tanks which have not released, i.e. those that are pressur-
ized, must not be opened or stripped down.
Precise knowledge of the system(s) in question is required for the performance of
service tasks. This includes:
● DET-AC III Master (Part No. 7338.121)
● DET-AC III Slave (Part No. 7338.321)
● EFD III (Part No. 7338.221)
The respective system type, operating instruction and the Firmware installed when
delivered can be ascertained from the information on the type plate (part number,
serial number, order number).
Before the start of the inspection/maintenance, the current maintenance information
is to be requested from the manufacturer!
Reference to chapter
║
„
Task
‟
║
page reference
Chapter 10.2.1 „ Checking for proper installation”
X
Chapter 10.2.2 „Checking for external damage” on page 66
X
Chapter 10.2.3 „Recording the WA No. / Part No. / F. No.”
X
Chapter 10.2.4 „Recording the date of the current mainte-
nance / inspection” on page 67
X
Chapter 10.2.5 „Recording the current version” on page 67
X
Chapter 10.2.6 „Checking current fault messages, history
since last maintenance” on page 67
X
Chapter 10.2.7 „Checking the discharge nozzle for contami-
X
Chapter 10.2.8 „Checking the temperature indicator”
X
Chapter 10.2.9 „Checking the setting of date and time”
X
Repairs
Operating Instructions / DET-AC III Slave / 916007 / 05-2016 / en_US
63
