background image

SUB D 15-PIN CONNECTOR

The DTX-445-145 is equipped with a 15-pin 
sub D connector with the following functions:

Pin #  Name 

Description

  1 

CS0 Channel   Select low bit 

  2 

CS1 Channel   Select mid bit

  3 

CS2Channel   Select high bit

  4 

MIC IN  

Microphone Input

  5 

H/L PWR  

High/Low Power

  6 

SUPPLY 

Power Supply Input

  7 

AUX IN  

Auxiliary Input

  8 

AUX OUT  

Auxiliary Output

  9 

PGN IN/OUT   Programming I/O

  10 

N/A  

Not Used

  11 

RX MON 

Monitor 

  12 

Audio Out  

Audio PA Output

  13 

DCD  

Carrier Detect

  14 

PTT  

Push-to-Talk

  15 

GND  

Ground

SINGLE BOARD TRANSCEIVER WITH 

HOUSING & MOUNTING FLANGES

SINGLE BOARD TRANSCIEVER

(Board Only)

Reliable and Feature Rich.

RF Transceivers, Radio Modems and Specialized Wireless Communication Equipment 
for OEM and Integrator Applications – Since 1977.

  

RECEIVER  

25 kHz Wide band    12.5 kHz Narrow band   25 kHz Wide band    12.5 kHz Narrow band  

Sensitivity (12 dB SINAD):

  

0.25 µV  

0.25 µV  

.25uV  

.25uV

Adjacent channel:

  

-67 dB   

-60 dB  

-67dB  

-60dB

Spurious rejection:

  

-70 dB  

-70 dB  

-65dB  

-65dB

Image rejection:

  

-75 dB   

-75 dB  

-70dB  

-70dB

Intermodulation:

  

-67 dB  

-67 dB  

-67dB  

-67dB

FM hum and noise:

  

-43 dB  

-37 dB  

-43dB  

-37dB

Conducted spurious:

  

-57 dBm  

-57 dBm  

-57dB  

-57dB

Receiver attack time 

(TX to RX):

  < 10 ms  

< 10 ms  

< 10 ms   

< 10 ms

Noise squelch attack time:

  

< 15 ms  

< 15 ms  

< 15 ms  

< 15 ms

 (for 20 dB quieting)

RSSI squelch attack time:

  

< 5 ms  

< 5 ms  

< 5 ms  

< 5 ms

RSSI squelch sensitivity:

  

PC adjustable; factory set for –106 dBm

Noise squelch sensitivity:

  

PC adjustable; factory set for –121 dBm

AUX OUT frequency response:

   12 - 2500 Hz @ +1 / -3 dB

AUX OUT level range:

 

0 to 3 Volts peak-to-peak

Audio Speaker Output:

 

 >700 mW into 8 

Ω

, with less than 5 % THD ( 0 to 2.5 Vrms)

Audio Speaker freq response: 

 de-emphasized 6 dB/octave from 400 to 2500 Hz 

Current Drain:

 

Receive Standby: 25 mA at 12.5 VDC

TRANSMITTER

Voice Emission Designator:

   15K0F3E  

10K0F3E  

 

15K0F3E  

10K0F3E

RF Power Output: 

 

2.0 Watts @ 12.5 VDC < .9 A       

 

2.0 Watts @ 12.5 VDC < .9 A 

 

 

8.0 Watts @ 12.5 VDC < 1.8 A        

 

5.0 Watts @ 12.5VDC <  .9 A

 

10.0 Watts @ 14 VDC < 1.8 A

T

ransmitter Duty Cycle:

 

With supply below 13.5 volts:

  

 8 W board only model - 100 % with added heat sink** maintained at 25° C

  

 8 W encased model - 33 % with case end cap*** maintained at 25° C

  

 5 W encased model - 50 % with case end cap*** maintained at 25° C 

 

 (with heat sink or case end cap above 25° C, degrades linearly to 0% at 60° C)

 pending model

** a heatsink can be added to the board only versions using the two holes next to the RF PA shield.

*** case end cap refers to aluminum extrusion end cap on opposite side from connectors.

Data Emissions Designator for external modem:

  

 

9K8F1D

Deviation:

  

+/- 5.00 kHz  

+/- 2.50 kHz  

 

+/- 5.00 kHz  

+/- 2.50 kHz

Transmitter attack time:

 

 

 

< 10 ms

FM Hum and Noise:

  

-45 dB  

-40 dB  

 

-45 dB  

-40 dB

Audio Distortion:

  

 

 

< 5 % 

 

 

Spurious and Harmonics: 

                       -25 dBm max    

                             -20 dBm max

Aux In frequency response:

   8 Hz to 2500 Hz @ +1 / -3 dB

Aux In level range:

  

0.1 to 5 V peak-to-peak

Microphone freq response:

  

pre-emphasized 6 dB/octave from 300 to 2500 Hz

Microphone level:

  

25 mV rms for n/- 3 kHz deviation on wideband channel

Current Drain:

 

2.0 Watts @ 12.5 VDC < .9 A 

2.0 Watts @ 12.5 VDC < .9 A

 

8.0 Watts @ 12.5 VDC < 1.8 A 

5.0 Watts @ 12.5VDC <  1.2 A

 

10.0 Watts @ 14 VDC < 1.8 A

GENERAL SPECIFICATIONS 

UHF DTX-445

  

 

VHF DTX-145

FCC ID:

   

 

AIERIT17-445  

 

AIERIT17-145

Industry Canada ID:

  

 

1084A-RIT17445 

  

1084A-RIT17145

FCC Rule Parts:

  

 

 

90

Industry Canada Rule Parts:

  

 

RSS-119

Frequency Range:

   400.6 – 416.5

, 411 – 429

, or 450 - 470 MHz   

136 to 162 MHz, 148-174MHz

RF Channels:

  

 

 

8 Independent TX/RX frequencies

Synthesizer Step:

  

 

6.25kHz  

 

2.5kHz

Channel Spacing:

  

 

 

12.5kHz

Frequencies unusable:

  

 

 

TBD

Frequency Stability:

  

+/-1.5 PPM (-30° to +60° C)   

 

+/-2.5 PPM (-30° to +60° C)

Tone/Code Signaling:

  

 

 

CTCSS (Quiet Call) and DCS

Power Supply: 

 

 

 

9 to 17 VDC

Dimensions & weight:

  

 Board only version: 4.75” x 2.8”x .625”  /  2.1 oz

 

 Encased version: 5.7”x 3”x 1.375”  /  7.3 oz.

Antenna Fitting:

                      BNC female with encased version. Other options available on board only version. 

 pending model

P.O.Box 1998, Carmel, IN 46032 

 PH: 317.846.1201 

 FX: 317.846.4978 

 email: [email protected] 

 www.ritron.com  

©2010 Ritron, Inc. All rights reserved. Ritron, Jobcom, Patriot, OutPost, GateGuard, Radio Nexus, Quiet Call and QuickAssist are registered trademarks of Ritron, Inc. Quick Talk, Liberty, and LoudMouth are trademarks of Ritron, Inc.      9/10  

Reviews: