ritm Voyager 2N, Operating Manual

Page: 170 / 173

Operating Manual. Voyager 2N
Commands to change the settings of the tracker
Command Description Syntax Example
+CONNECT_SERVER
Specify the server address
(equivalent to specifying
the options in section
"Coordinate Receipt Servers")
+CONNECT_SERVER=< N >,< Object
number >,<" Password ">,
<" IP address or domain name" >,< Port >
where < N >:
1 - Main RITM server;
2 - Reserve RITM server;
3 - Main EGTS server;
4 - Reserve EGTS server.
+CONNECT_SERVER=1,1,
"pass123","dev1.
eu.ritm.ru",9426
+PROTOCOL_TYPE
Specify the data transferring
protocol type
+PROTOCOL_TYPE=1,< X >
where <
X
>:
0 -data transferring only in RITM protocol;
1
- data transferring in RITM and EGTS protocols;
2 - data transferring only in EGTS protocol;
3
- data transferring is off.
+PROTOCOL_TYPE=1,0
+VR_PACK_SIZE
Changing of the current time
interval of navigation data
transmission to the server
(equivalent to specifying the
options in section «Track»)
+VR_PACK_SIZE=1,< The number of records >
where <
The number of records
> - number
of undelivered records that are required
to send data to the server. (1..30)
+VR_PACK_SIZE=1,30