ritm Voyager 2N, Operating Manual

Page: 112 / 173

www.ritm.ru 112 of 173
Operating Manual. Voyager 2N
History
The “History” section (Fig. 40) shows history of changes of parameters
stored within the tracker memory. Parameters to be stored in the tracker
memory may be chosen in the “History Structure” section.
To configure record presentation parameters, press the gear button in
the top right corner of the screen.
Besides selected parameters, each history record has the following data:
1. “Record number”: Serial number of the record (the last number is
saved with cleaning of the history).
2. “Record type”: “By event”, “By shift”, “By time”.
3. “Transmitted”: Status of record transmission to the server
(“Transferred”/”Not transferred”).
History can be exported to .txt, .kml and .json files. When exporting to a
.json file, you can use export filters by date and record number. To do so,
choose the export format “JSON Date” or “JSON Record Number”,
respectively. To save data to a file, use corresponding hyperlinks.
Numbers of recorded history pages are shown under the table. You can
open any history page by clicking on its number or entering its number in
the corresponding field and clicking “Go”.
When clicking the “Update page” hyperlink, the page is updated with
the latest history records.
Click “Erase history” if you want to completely erase the tracker memory
(the “index” serial number is not removed, so all new records will follow
the same numbering).