Riso SE 9380, User Manual

Page: 228 / 268

Troubleshooting
When a Message Displays
226
D00-000:Installation Error (in alphabetical order)
Message Possible Cause Action
Close Front Cover The Front Cover is open or
improperly closed. Check for the magnet underneath the
Front Cover and firmly close.
Close Master Making Unit Cover The Master Making Unit Cover
is open or is improperly
installed. Pull out the Master Making Unit, check
and firmly close its cover.
Close the ADF Cover Optional Auto Document
Feeder DX-1 cover is open or
incorrectly set. Check the ADF Cover and close it firmly.
Install Ink Cartridge The Ink Cartridge is improperly
installed or is missing. Properly install the Ink Cartridge.
) p.207
Master Making Unit has been
Unlocked The Master Making Unit is
ready to be pulled out. Pull out the Master Making Unit.
Print Drum has been Unlocked The Print Drum (Cylinder) is
ready to be pulled out. Pull out the Print Drum (Cylinder).
Print Drum Not Set in Place
Press Drum
Release Button and Pull Out Print Drum
after the Button Lights The Print Drum (Cylinder) is
locked but not pushed in
properly. Press the Print Drum (Cylinder) Release
Button. Remove the Print Drum (Cylinder)
after the button is lit and reinstall.
Rear Cover of Main Body is Off
Call Service The machine rear cover is
removed. Contact your dealer (or authorized service
representative).
Set Master Disposal Box in Place The Master Disposal Box is
improperly set or is missing. Properly set the Master Disposal Box.
) p.209
Set Master in Place No master is installed. Install a Master Roll.
) p.204
Set Master Making Unit in Place The Master Making Unit is
missing or is improperly installed. Properly install the Master Making Unit.
) p.204
Set Print Drum (Cylinder) in Place The Print Drum (Cylinder) is
improperly set or is missing. Properly install the Print Drum (Cylinder).
) p.211
Wrong-type Ink Cartridge Installed
or Cannot Read Ink Info
Replace Ink Cartridge
or Contact dealer (or authorized
service representative)/Riso office Incorrect type or color of the Ink
Cartridge is installed. Properly install a correct Ink Cartridge.
) p.207
Important!:
• Use the Ink Cartridge specifically
designed and approved for use with this
machine. Failure to do so may cause
problems or damage to the machine.
The label on the Ink Cartridge
outlet surface has come off or
surface is with dirt. The label on the Ink Cartridge outlet
surface contains information needed for
printing. If the machine cannot read the
information, it does not operate.
Set an Ink Cartridge that is specific to the
machine and that is with label attachment
and free from dirt.