Riso SE 9380, User Manual

Page: 119 / 268

Advanced Features
Setting Up User Management [User Management]
117
Selecting Recognition and Identification System
Set the Recognition and Identification System using “Recognized by” in advance when setting up User Management.
Important!:
• If “Recognized by” is changed, all settings in User Management, including the administrator’s registration, will be
cleared.
1
Touch [Admin.] on the Basic Screen
for each mode.
2
Touch [OK].
Skip to step 4 if the administrator is not registered.
If the administrator is already registered, the Rec-
ognition Screen is displayed here.
See step 3.
3
Identify the administrator.
‹
When “Recognized by” is set to
“PIN Code”
Input the administrator’s PIN Code.
‹
When “Recognized by” is set to
“USB Flash Drive”
Connect the administrator’s registered USB
Flash Drive to the USB slot.
Ready to Make Master Ready to Make Master
Black
D-Feed D-Feed
Check Check
Renew Page
Ready to Make Master Ready to Make Master
Ready to Make Master Ready to Make Master
Ready to Make Master Ready to Make Master