Riso RISO RZ10 Series, User Manual

Page: 80 / 120

78
Creating a RISORINC-format file
Working with the Printer Driver
■
Creating a RISORINC-format file
It is necessary to create a RISORINC-format file before sending data via FTP
with RISO Network Card.
A RISORINC-format file can only be used with RISO printers.
All settings made in the Printer Driver are saved with the file.
IMPORTANT!
The procedure for creating RISORINC files differs when using the
3
to
0
set-
tings of the [Layout] Tab ( Page 59 ). See “Creating RISORINC Files When Using
the [Layout] Tab Setting” ( Page 80 ).
Open a document file and specify the print job in the [Print]
dialog box.
Select [Print] in the [File] menu to open the [Print] dialog box.
Confirm that [RISO...] is selected in the [Printer] field in the
[Print] dialog box.
The selected [RISO...] should correspond to the RISO printer model to which
your document file is to be transmitted. Otherwise, the transmitted document
data may not be printed out correctly on the target RISO printer.
IMPORTANT!
• The RISORINC-type file should be created with the RISO Printer Driver cor -
responding to your RISO printer. If the Printer Driver does not correspond to
your RISO Printer Driver, the transmitted document may not be printed out
correctly.
• USB flash-via-Printer Driver cannot be used.