Riso RISO RZ10 Series, User Manual

Page: 37 / 120

USB Flash Drive Output
Installing the Printer Driver
■
USB Flash Drive Output
(Not available for EZ3x1/EZ2x1 series)
About USB Flash Drive
●
Use USB Flash Drive compatible with Mass Storage Class. Depending on
the type of USB Flash Drive, the Printer Driver may not work properly.
●
When connecting or removing USB Flash Drive, insert it or pull it out slow -
ly by using the correct method.
●
When USB Flash Drive data is damaged by natural disaster or contin -
gency, the data saved in the USB Flash Drive cannot be guaranteed. It is
recommended to back up important data with your computer with which
the data has been created.
Installing the USB flash-via-Printer Driver
This section describes how to install the USB flash-via-Printer Driver when
using a USB Flash Drive to print.
(Regarding the procedure for manual installation, see page 9 .)
IMPORTANT!
• You are required to have the administrator’s privilege to install the Printer
Driver program in your computer.
• This Printer Driver does not support server OS or printer sharing.
Insert the [RISO Printer Driver] CD-ROM into your computer’s
CD-ROM drive.
The installer is started. If the installer does not start up, double-click on the
[Setup(.exe)] file in the folder below.
For Windows XP/Windows Vista(32-bit)/Windows 7(32-bit)/
Windows 8(32-bit)/Windows 8.1(32-bit):
(CD-ROM):[Windows 32-bit] folder
For Windows Vista(64-bit)/Windows 7(64-bit)/Windows 8(64-bit)/
Windows 8.1(64-bit):
(CD-ROM):[Windows 64-bit] folder
If the [User Account Control] dialog appears, click [Allow] (for Windows Vista)
or [Yes] (for Windows 7/Windows 8/Windows 8.).