Riso Perfect Binder G10 120 User Manual Download Page 42 | Manualshive

Page: 42 / 78

background image

2-2

Perfect Binder User’s Guide

Replacing the Consumables

For comfortable use of the Perfect Binder, the daily
maintenance is important. This section describes
the replacement of glue sheet, secondary filter, and
dispose of cutting trash.

When the glue runs out, the message prompting to
replace the glue sheet is displayed on the printer's
operation panel and the binding is stopped.
Replace the glue sheet.

1

Open the side cover.

2

Remove the finished glue sheet
core.

3

Remove the finished rolling core.

4

Set the new rolling core.

Align the projection of the Perfect Binder and the
notch of the core, and fit them.

• This unit warms up the glue, so that the glue

unit part becomes high temperature. Body
contact may cause burn. The side cover will not
open until the temperature inside of this unit is
lowered. Please wait until this unit cools down.

• When the remaining amount of the glue is low,

a message is displayed on the printer's
operation panel. Check your stock.

• For more information on the maintenance of the

printer, see the guides of the ComColor GD
Series printer.

Replacing the Glue Sheet

«
...
40
41
42
43
44
...
»

Summary of Contents for Perfect Binder G10 120















































































Reviews:

No comments

Related manuals for Perfect Binder G10 120

Brand: Baby Lock Pages: 2

Brand: Samsung Pages: 88

Brand: Samsung Pages: 11

Brand: Samsung Pages: 98

Brand: Vendors Exchange Pages: 13

Brand: Fastbind Pages: 21

Brand: Morris Pages: 20

EXPRESSION 2028

Brand: Pfaff Pages: 4

Brand: Radio Shack Pages: 24

Brand: Briteq Pages: 8

Brand: PHC Pages: 4

Brand: Froggy's Fog Pages: 2

Brand: Ehle Pages: 20

Clarke Encore L26 Cylindrical

Brand: Alto Pages: 32

Brand: Pfaff Pages: 12

Brand: Kettler Pages: 12

HZL - 353Z Series

Brand: JUKI Pages: 78

Brand: Panasonic Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands