Riso MZ1070, Technical Manual, Page: 130 / 150

[ 16-96 ] MZ870 / MZ890 / MZ1070 / MZ1090 (Revision 0.9)
PANEL MESSAGE
Error type F01 [No master on Drum No. 1]
Panel display
F01-***
No Master on
Print Cylinder 1
Make a New Master
Error reset
method
Press the Reset key. Set an original and execute the master-making operation.
Error point Error detecting condition
015
There is no master on the print drum at the start of printing.
Error type F02 [Paper/master-making size incompatibility 1]
Panel display
F02-***
Page Format is Larger
than Paper Size
!! Possible Ink Smudges
on Prints !!
Error reset
method
Press the Continue button or Stop button (Check print paper size).
Error point Error detecting condition
018
Paper and master-making sizes (master image size on print drum) do not match at the start of printing.
Error type F03 [Multi-up: Paper size error]
Panel display
F03-***
!! Multi-Up is Not Available
with This Paper Size !!
Replace with Proper Paper
of Standard Size
Error reset
method
Touch [Close] button, or press Stop button. Set proper standard-size paper on the paper feed tray.
Error point Error detecting condition
016
The multi-up operation was executed with nonstandard (customs size) paper.
Error type F04 [ Admin. Setting: Maximum setting reached ]
Panel display
F04-***
!! Reached Maximum Count !!
Cannot Continue
Error reset
method
Touch [Close] button, press Stop key, or press Reset key.
Error point Error detecting condition
905
The master-making count reached the maximum count.
906
The print count reached the maximum count.
7. Warning (F**: Others)