Riso MH 9350, User Manual

Page: 175 / 218

Chapter 9 Replacing Consumables
173
9
3
Close the front door.
■
When you have changed the type of
print drum (cylinder)
When you change the type of print drum (cylin-
der) between Ledger/A3 and A4/Letter, a con-
firmation screen is displayed. Confirm the type
of the print drum (cylinder) using the following
steps.
1
Touch the type of the print drum (cylinder)
that you have set.
2
Touch [OK].
Collecting and Disposing of
Depleted Consumables
Ink cartridge
• Dispose of the depleted ink cartridges according to
the disposal regulations of your local community. If
required, separate the specific components using
the following procedures as a reference.
• Remove the label at the edge of the ink cartridge by
peeling it off from the section indicated with the
arrow in the illustration below, and then dispose of it
separately.
Parts Materials
Ink cartridge and
cap Plastic (polypropylene or polyeth-
ylene)
Label Plastic (metal included)
Ink Plant oil, petroleum hydrocar-
bons, water, pigments
Ink may be left on the area around the edge of the
ink cartridge. Take care not to smudge your hands
or clothes with the ink. Wash immediately with soap
if you get ink on your hands, etc.
Caution