Replacing Consumables
Emptying the Master Disposal Box
247
Emptying the Master Disposal Box
Used masters are held in the Master Disposal Box. When the Master Disposal Box becomes full, a message displays
and the machine stops. Discard the used masters.
B
Caution:
• Wash immediately with soap if you should get Ink on your hands, etc..
Important!:
• The Master Disposal Box can be padlocked to prevent the information contained in the discarded master being
leaked. If the Master Disposal Box is safely protected by the padlock, be sure to contact the administrator before
discarding the master.
• When “Protect” is ON, you can remove the Master Disposal Box only when the messages such as “Master Dis-
posal Box is Full” or “Master Jammed in Disposal Unit” are displayed.
This machine has two master disposal boxes, one for Print Drum (Cylinder) 1 and one for Print Drum (Cylinder) 2.
The procedures are same for both. The master disposal box for Print Drum (Cylinder) 1 is explained here.
1
Remove the Master Disposal Box.
If the Master Disposal Box lever is locked, slide
the lever to the right to unlock.
Grasp the Master Disposal Box handle and pull
the box forward.
Important!:
• If the Master Disposal Box is padlocked, con-
tact the administrator to undo it.
Unlock
Master Disposal
Box Handle
Master Disposal Box for Print Drum (Cylinder) 1
Master Disposal Box for
Print Drum (Cylinder) 2
