Functions for Master-Making
Dual-Color Printing with 1 Original [Easy 2Color]
103
Note:
• About the Separation Sheet
Use the Separation Sheet if you are using an original that you cannot write on. Also use the Separation Sheet for
separating originals with photos or color images. The Separation Sheet should be a white sheet of paper the same
size as the original. Place the sheet on the original and draw around the area to be printed by Print Drum (Cylinder)
2 with the pen.
Color editor
This function is used to execute Dual-Color print only by specifying the desired areas to be separated on the touch
panel after scanning a paper original.
Also this function can be used by calling storage data.
Assign the part outside the area to Print Drum (Cylinder) 1 and that inside area to Print Drum (Cylinder) 2 to make a
master.
Important!:
• To use “Storage Memory”, an optional Document Storage Card is required.
• The edit function cannot be used with the Color editor. When you want to edit the specified area, select “Editor”
from the Functions Screen.
Separation Sheet
Original
Print Results
Print Drum (Cylinder) 1
(outside area)
Print Drum (Cylinder) 2
(inside area)
Touch Panel (Specifies the Area)
