Page
of
1 2
ISSUE NO. :
HCT-034
Attached: HC FINISHER Roller Replacing Procedure
Issued By Overseas Technical Sec., Riso Kagaku Corp.
HC Technical Bulletin
MODEL: HC FINISHER
DATE: 10 April, 2006
Data Category
Field Modification
Trouble Shooting
General Information
Safety Advice
Proceeding Grade
Parts Compatibility
Handling of Modified Parts
Action ASAP
Compatible
Free of Charge
Action as given
Conditionally Compatible
Conditionally Chargeable
Action if required
Not Compatible
Chargeable
Refer in need
Old Obsolete
Our Ref. AP2-0352
SUBJECT:
HC FINISHER
[Brief]
With reference to the limited capability of HC Finisher on our HC Technical Bulletin HCT-024,
some rollers have been modified to reduce "paper-feeding-marks (ink-marks)" on the printed
documents.
The new roller is a ceramic coated roller which has ceramic tips on the surface of rubber.
This coating will prevent the roller from catching ink on surface, and reduce a transferring back
on the paper.
[Newly
Registered
Part]
(Present type roller)
A) 033-13233-005
ROLL ASSY-PUNCH
<=
033-13201-006
B) 033-13234-001
ROLL ASSY-BOOKL
<=
033-13202-002
C) 033-13235-008
ROLL ASSY-BUFFE <=
033-13204-005
D) 033-13236-004
ROLL ASSY-EXIT
<=
033-13206-008
E) 033-13237-000
ROLL ASSY-TA2
<=
033-13207-004
F) 033-13238-007
ROLL ASSY-ENTRA
<=
033-13209-007
G) 033-13239-000
ROLL ASSY-BOOK <=
033-13219-002
Red marked 7 rollers are the modified
rollers.