Riso ComColorExpress IS1000C, Setup Manual, Page: 16 / 66

Notice about Safety and Handling
Part Names and Functions
14
Rear side
Connectors for connecting the ComColorExpress IS1000C / IS950C to other devices and two buttons are provided
on the back of the unit.
Important!:
• Switch off the power to both the IS1000C / IS950C and the other device prior to connecting them together. Failure
to observe this may result in malfunctions or failures.
• The permissible voltage for all input / output connectors is 5 V.
Note:
• A monitor (1024×768 or greater resolution recommended), USB keyboard, and USB mouse can be connected to
the IS1000C / IS950C. (Certain features are not available. For details, refer to the separate manual, “Utility
Guide”.)
1)
Power supply
2)
Monitor connector (DVI)
3)
Monitor connector (VGA)
4)
USB 2.0 connector (4 Ch)
5)
1000BASE-T / 100BASE-T / 10BASE-T
connectors (2 Ch)
Upper: For printer connection
Lower: For computer connection
6)
Test button
7)
Reset button