Chapter 5. Setting via Web
Table 5-9. Key Functions of Wireless Roaming
Menu
Default
Description
Wireless
Roaming
enable
disable
Set whether to use of the Roaming functions
•
Enable :
Use Roaming function.
•
Disable :
Do not use Roaming function.
Roaming
Threshold
-75 (dbm)
If you have different Access Points and have enabled roaming, you should
also set carefully the
roaming threshold
, which is the point (in signal
strength) at which WiComm-1 search for a new Access Point. If you set it
too low, WiComm-1 will spend to much time with a non optimal AP (getting
a poorer throughput), and if you set it too high the card will waste time
searching for a new AP too often.
Max -50 dbm ~ Min -90 dbm
Roaming
Scanning
Period
60 (second)
If receive signal level is lower than Roaming Threshold, WiComm-1 scans
the all AP(Access Point) every Roaming Scanning Period,
Max 200 ~ Min 50 second
If the Wireless Roaming is set to enable, the following windows appears.
그림 5-7. Wireless Roaming Setting Windows
Table 5-10.
Key Functions of Wireless Security
Menu
Default
Description
Security
Mode
None
Sets the security authentication mode of a wireless network.
•
NONE :
No use of the security authentication
•
WEP 64bit Encryption :
Use 24-bit WEP key.
•
WEP 128bit Encryption :
Use 12-8bit WEP key.
If the Security mode is set to WEP 64-bit or WEP 128-bit, the following window appears:
5-12
