Chapter 5. Setting via Web
The key functions of Management Configuration are as follows:
Table 5-5. Key Functions of Management Configuration
Menu
Default
Description
SNMP Disable
Enables or disables the Simple Network Management Protocol (SNMP)
function. (Option: Disable, Enable)
•
MIB-II (RFC 1213): System, Interface, IP, ICMP, TCP, UDP
•
MIB-I (RFC 1317): Serial Interface
Portview Disable
Enables or disables the Portview function. (Option: Disable, Enable)
If this function is enabled, the following setting is available.
Figure 5-4.
Management Setting Window
The key functions of Portview Configuration are as follows:
Table 5-6. Key Functions of Portview Configuration
Menu
Default
Description
Portview
Server
IP / Port
0.0.0.0 / 4000
Sets the IP address and the socket number of a PC where the Portview is
installed.
If the IP is set to 0.0.0.0, the Portview is not used.
(For detailed information, refer to Portview User's Manual.)
5-5
